Need help?Do you have a question about the KitchenAid KBFS20ETBL01 and is the answer not in the manual?
General| Brand | KitchenAid |
|---|---|
| Model | KBFS20ETBL01 |
| Category | Refrigerator |
| Language | English |
Includes Tech Sheet, Owners Manual, and Energy Tag.
Small fastening component.
Component for pivoting mechanism.
Sealing component.
Component for mobile support.
Fastener for grille.
Bottom sealing plug.
Fastening screw.
Adjustable fastening bolt.
Protective cover for right hinge.
Top hinge component for the right side.
Protective cover for left hinge.
Central hinge component.
Component for filter housing.
Protective corner cover.
Top hinge component for the left side.
Main structural body, not a replaceable part.
Shim for hinge adjustment.
Complete grille unit with fasteners.
Cover for water line.
Cover for water valve.
Protective cover for internal unit.
Elbow fitting for fill tube.
Clip for drain tube.
Material for sound dampening.
Component for stabilizing the appliance.
Clip for securing a tube.
Component for fluid drainage.
Main inner lining, not user-replaceable.
Foam sealing gasket.
Toothed component for mechanical action.
Protective cover for light fixture.
Rotating or moving rod.
Holder for light bulb.
Component that emits light.
Enclosure for light fixture.
Protective cover for evaporator.
Support structure for door components.
Enclosure for lighting.
Clip for evaporator motor.
Component to control light.
Support for basket.
Mechanism for drawer movement.
Bottom sealing gasket.
Bracket for slide mechanism.
Shroud for fan grille.
Protective cover for evaporator fan.
Rotating element of the evaporator fan.
Rubber ring for sealing or vibration.
Component that drives the evaporator fan.
Component to guide liquid drainage.
Sealing component.
Sealing component.
Temperature sensing component.
Protective cover for thermistor.
Main internal lining, not user-replaceable.
Mounting bracket for control and light assemblies.
Decorative or protective top layer.
Enclosure for the electronic control unit.
Main circuit board for appliance operation.
Component to activate or deactivate light.
Protective cover for the light fixture.
Enclosure for the light bulb.
Illumination source.
Holder for the light bulb.
Internal part of the damper cover.
Protective cover for the damper.
Material for thermal or sound insulation.
Component regulating airflow.
Temperature sensing component.
Fitting to connect two tubes.
Container for water storage.
Mechanism for dispensing water or ice.
Component for filter mounting.
Main component of the water filter assembly.
Protective cover for the filter.
Component to purify water.
Plug to bypass the filter.
Clip for securing water line.
Front panel of the dispenser.
Switch that activates at a limit.
Mounting plate for a switch.
Clip for securing water tube.
Component to guide water line.
The left-side door panel.
Bearing for the bottom left door hinge.
Storage area within the door.
Removable tray for dairy products.
Storage bin for the door.
Fastening screw.
Sealing gasket for the door.
Component for opening and closing the door.
Bracket that secures the door handle.
Large storage bin for the door.
Vertical seal between doors.
Holder for cans.
Mechanism to keep the door closed.
Component that limits door opening.
Vent plug.
Bearing for the upper right door hinge.
Bearing for the lower right door hinge.
The right-side door panel.
Identification label for the appliance.
Fastening screw.
Rotating element of the fan.
Base support structure.
Fastening screw.
Component that circulates refrigerant.
Wiring harness for the evaporator heater.
Container for collected condensation.
Rubber ring for sealing or vibration dampening.
Heating element for the evaporator.
Electrical component storing energy.
Protective and starting component for motor.
Sealing component.
Temperature control component.
Rubber ring for sealing or vibration dampening.
Cover for the condenser.
Clip for securing the capacitor.
Component that dissipates heat.
Tube carrying refrigerant discharge.
Tray to catch condensation.
Clip for evaporator components.
Component responsible for cooling.
Component, possibly a barrier or support.
Component that drives the fan.
Clip for securing a heater.
Wiring harness for the entire unit.
Component that removes moisture from refrigerant.
Clip for securing the drier.
Mounting bracket for the condenser.
Rubber ring for sealing or vibration dampening.
Fastening screw.
Cover for High Voltage component.
Circuit board for High Voltage component.
Spacer for High Voltage component.
Enclosure for High Voltage component.
Fastening screw.
Wiring harness for High Voltage component.
Fastening screw.
Fastening screw.
Rubber ring for sealing or vibration dampening.
Block associated with condenser.
Glass shelf for pantry section.
Container for storing eggs.
Fastening screw.
Support structure for pantry items.
Bracing component for pantry.
Sliding track for pantry components.
Separator for the upper basket.
Sealing gasket for pantry.
Enclosure for control components.
Shelf with gliding mechanism.
Slide mechanism for temperature control.
Sliding component for drawers.
Sliding track for pantry components.
Container for crisper drawer.
Support for the crisper cover.
Decorative or protective trim for crisper.
Structural frame for crisper.
Glass cover for crisper.
Central ladder-like component.
Side ladder-like component.
Component for temperature regulation.
Drawer for the pantry section.
Control knob for temperature adjustment.
Door for the pantry drawer.
Lower basket for the freezer compartment.
Separator for the lower basket.
Upper basket for the freezer compartment.
Separator for the pantry drawer.
The main freezer door panel with insulation.
Component for opening and closing the door.
Bracket that secures the door handle.
Sealing gasket for the freezer door.
Fastening screw.
Vent plug for the door.
Paint and brush kits for cosmetic repairs.
Larger quantities of paint for refinishing.
Various non-essential repair and maintenance items.
To Next Page