To Next PageTo Next Page
Need help?Do you have a question about the KitchenAid KDTM404ESS and is the answer not in the manual?
General| Brand | KitchenAid |
|---|---|
| Model | KDTM404ESS |
| Category | Dishwasher |
| Language | English |
Essential safety precautions and warnings for operating the dishwasher.
Explanation of the microfiltration wash system and how it functions.
Details on advanced features like ProDry, Dynamic Wash Arm, and ProScrub.
Location and identification of the model and serial number label on the dishwasher.
Information on where to find the technical service sheet for the dishwasher.
Explanation of the coding system used for model and serial numbers.
Technical data including electrical, water, dimensions, and weight.
Identification and description of various parts and features of the dishwasher.
General notes and additional information related to dishwasher operation.
Quick guide for initial setup, filter cleaning, and basic operation.
Step-by-step instructions for preparing, selecting cycles, and starting the dishwasher.
Detailed guidance on loading dishes and using the dishwasher effectively.
Explanation of available wash cycles, soil levels, and optional features.
Understanding indicator lights, displays, and feedback during operation.
Description of specific features like ProScrub, Culinary Caddy, and flexible tines.
Instructions for cleaning the exterior, interior, and filters.
Common problems, potential causes, and solutions for dishwasher issues.
Additional notes and reminders regarding dishwasher operation.
Crucial safety warnings and precautions during dishwasher installation.
Tools, parts, and general requirements needed for installation.
Criteria for selecting an appropriate and safe location for installation.
Specifications and instructions for connecting the drain hose.
Guidelines for proper electrical hookup and safety compliance.
Step-by-step procedures for installing the dishwasher.
Measuring and preparing the cabinet opening for dishwasher installation.
Selecting and installing the correct bracket for securing the dishwasher.
Final steps to secure the dishwasher within the cabinet opening.
Verifying proper functionality after installation is complete.
Troubleshooting steps if the dishwasher fails to start or operate.
Helpful advice for optimizing dishwasher performance and longevity.
Accessing and removing the insulation blanket and door latch strike.
Location and access to water inlet and drain hose components.
Procedure for adjusting the door spring tension for proper operation.
Accessing and disassembling components related to the Advanced ProDry system.
Accessing and disassembling the overfill protection and float switch assembly.
Procedure for accessing and replacing interior LED lighting components.
Steps to access and remove outer door panel and user interface components.
Detailed steps for removing the user interface console assembly.
Procedure for removing the door latch assembly from the dishwasher.
Steps for removing the detergent dispenser assembly from the door.
Identification of components located inside the dishwasher tub.
Identification and access to spray arms, feed tubes, and manifolds.
Instructions for removing the upper dishwasher rack.
Instructions for removing the lower dishwasher rack.
Steps to remove the third-level culinary tool rack.
Procedure for removing the lower spray arm assembly.
Steps to remove the ProScrub manifold and associated feed tube.
Procedure for removing the diverter disk and housing.
Identification of components located beneath the dishwasher tub.
Steps to access and remove the electronic control assembly.
Procedure for removing the heater element assembly.
Steps to remove the drain pump and sump assembly.
Procedure for removing the optical water indicator sensor.
Steps to remove the diverter motor and assembly.
Exploded view and parts list for the wash motor assembly.
Procedure for removing the wash motor and rotating inlet filter.
Safety precautions for performing diagnostic and troubleshooting procedures.
Instructions for initiating and using the service diagnostic cycle.
Important notes and details for operating the service diagnostic cycle.
How customers can advance through cycles using Rapid Advance mode.
Procedure for accessing and displaying error codes during diagnostics.
Table listing function codes, problem codes, causes, and checks for error codes.
Guide for resolving common customer-reported dishwasher issues.
Safety instructions and precautions for performing electrical testing.
Schematic illustrating electrical connections and components.
Specifications and details regarding the dishwasher's control board.
Overview of how the control board and power supply function.
Procedure to test incoming and outgoing power to the control board.
Testing the wiring and components of the door switch circuit.
Testing the wiring and components of the fill circuit, including the valve.
Testing the wiring to the dispenser solenoid or wax motor.
Testing the heater element, thermostat, and heating circuit.
Testing the OWI sensor for water, temperature, foam, and turbidity.
Testing the wiring and operation of the diverter motor.
Testing the diverter position switch and its connection to the control board.
Testing the wiring and operation of the wash motor and its capacitor.
Testing the wiring and operation of the drain motor.
Testing the wiring and operation of the lower spray arm motor.
Testing the wiring and operation of the AC fan motor.
Testing the interior LED lighting circuit and individual LEDs.
Testing the wiring and functionality of the user interface and control board.
General notes related to testing procedures.
Contact information for product specifications and technical assistance in the US.
Contact information for product specifications and technical assistance in Canada.
