p
ELECTRIC BUILT-IN COOKTOPS
30 n MODELS: KECSlOO
KECXlOO
(KECS-1040), ESU-300
36 ” MODELS: KECG260
KECX260
(KECG-2640), ESUG-360
KECSIGO
KECX160
ESU-360
INSTALLATION
INSTRUCTIONS
INSTALLER: FINAL CHECK LIST
IMPORTANT:
LEAVE THESE INSTRUCTIONS FOR USE BY
THE LOCAL ELECTRICAL INSPECTOR
PLACEMENT OF COOKTOP
0
1.
Specified clearances maintained to adjacent surfaces.
0 2. Burner box securely anchored to cabinet top.
ELECTRICAL
0 1. Unit properly grounded.
0 2. Check that unit is connected to proper volt, amp and breaker ratings per Electrical
Specifications given in this booklet.
0 3. All connections made in accordance with local and/or National Electrical Code.
OPERATIONAL
0 1. Knobs installed on switches.
0 2. Top element indicator light comes on when any top element is turned on.
0 3. Grill/Griddle Models - Indicator light comes on when grill/griddle element is turned on.
0 4. Grill/Griddle Models - Pan/element assembly is properly assembled as shown in
Section C - Figure 3.
0 5. Grill/Griddle Models - Place cover over grill or griddle.
Unless instructed to leave for owner, remove all tags, labels, and internal packing material.
THANK YOU INSTALLER:
1. Complete Installation Checklist.
2. Leave all literature for customer.
3. Notify dealer that installation is completed.
FOR DETAILED INSTRUCTIONS, FOLLOW METHODS DESCRIBED IN THIS FOLDER.
To Next Page
Need help?
General
