Before rst use
Filling the Electric Kettle with water
2
Fill Electric Kettle. The water level is
displayed in 1 cup (.25 L) increments.
If there is no water in the kettle, the
water drop icon will display and the
alert tone will sound for 6 seconds.
Remove water if it exceeds the
“Max” line.
1
Open the lid of the Electric Kettle
by pressing the Lid Release Button.
Before first use, fill the Electric Kettle to the maximum level, then boil and discard the water.
The temperature can be displayed in Celsius (C) or Fahrenheit (F). To change setting, hold
the “-” and “+” buttons down at the same time.
NOTE: The Electric Kettle is designed for water only. Do not put any other liquids
or substances in the Electric Kettle.
NOTE: There must be a minimum of .25 L of water for Electric Kettle to operate. Do not
exceed the “Max” fill line.
4
Place the Electric Kettle on the base.
3
Push the lid down so it locks into
the closed position. You will hear
a clicking sound which indicates
the lid is locked.
To Next Page
Loading...
