USING THE FOOD CHOPPER | 7
USING THE FOOD CHOPPER
1
Be sure the Food Chopper is
unplugged.
2
Start with the work bowl handle
facing front on the base. Rotate the
handle 90° counterclockwise to lock
into place. When assembled properly,
the handle will face the right side.
3
Fit the blade over the shaft in the
center of the work bowl, rotate and
press down until it rests at the bottom
of the work bowl.
4
Place ingredients to be processed
inside the work bowl. For uniform
consistency of processed foods, cut
fruits, vegetables, and meats into
1-inch pieces.
ASSEMBLING AND RUNNING THE FOOD CHOPPER
IMPORTANT: Do not process coffee
beans or hard spices such as nutmeg,
which may damage the Food Chopper.
W11225535A_Full.indb 7 7/11/2018 2:33:05 PM
To Next Page
Loading...
Need help?
General
