2. If using a disc, remove it before
removing the bowl. Place two
fingers under each side of the disc
and lift it straight up. Remove the
disc stem.
3. If using the mini bowl or chef’s
bowl, grasp and remove the bowl
using the finger grips located
along the top edge of the bowl.
4. Turn the work bowl to the left to
unlock it from the base. Lift to
remove.
5. The multipurpose blade can be
removed from the work bowl
before the contents are emptied.
The blade can also be held in
place as you remove food: grasp
the work bowl from the bottom
and place one finger through the
center opening to grip the blade
shaft. Then remove food from the
bowl and blade with a spatula.
15
Disassembling the Food Processor
To Next Page
Loading...
