What to do if my KitchenAid Cooktop connection voltage is wrong?
If the sensor detects a discrepancy between the appliance voltage and that of the mains supply, disconnect the hob from the mains and check the electrical connection.
Why does my KitchenAid Cooktop control panel switch off due to high temperatures?
The control panel switches off to prevent damage when the internal temperature of the electronic parts becomes too high. Allow the hob to cool down completely before using it again.
What to do if the KitchenAid KHIP5 90510 Hob displays an incorrect connection voltage?
If the KitchenAid Hob shows that the connection voltage is incorrect, it means the sensor has detected a discrepancy between the appliance voltage and that of the mains supply. To resolve this, disconnect the hob from the mains and check the electrical connection.
Why does my KitchenAid KHIP5 90510 Hob switch off and beep every 10 seconds?
If your KitchenAid Hob switches off and a signal sounds every 10 seconds after 30 seconds, it indicates continuous pressure on the control panel area. Cleaning the control panel should resolve this issue.
What to do if the KitchenAid Hob control panel switches off due to high temperatures?
If the control panel of your KitchenAid Hob has switched off due to excessively high temperatures, it means the internal temperature of the electronic components is too high. Wait for the hob to cool down before using it again.
General| Type | Induction |
|---|---|
| Number of burners/cooking zones | 5 |
| Control type | Touch |
| Power Levels | 9 |
| Boost Function | Yes |
| Child Lock | Yes |
| Timer | Yes |
| Residual Heat Indicator | Yes |
| Auto Shut-off | Yes |
| Dimensions (WxDxH) | 900 x 510 x 56 mm |
To Next Page
