KitchenAid KSM2APC - Using the Spiralizer Attachment; Preparing to Process

ENGLISH
USING THE SPIRALIZER ATTACHMENT | 7
USING THE SPIRALIZER ATTACHMENT
PREPARING TO PROCESS
IMPORTANT: To prepare food before spiralizing, wash food, then remove stems,
cut the ends off squarely, and remove any eyes, if applicable.
1
Install fruit and vegetable skewer
by slipping onto the skewer mount,
and twisting counterclockwise until
it clicks into place.
2
Place bowl or plate under the
Spiralizer attachment, then affix food
to the fruit and vegetable skewer.
OPTIONAL: If using the peeler, install
by sliding into the bottom of the blade
carrier until it clicks into place.
3
Install the desired blade.
4
Pull the release lever, then push
the blade carrier towards the
Stand Mixer to align the blade
core with the center of the food.
5
Press blade core into food for
added stability before operating
the Stand Mixer.
IMPORTANT: When finished,
remove the blade before removing
your food item.
FOR DETAILED INFORMATION ON USING THE SPIRALIZER ATTACHMENT
Visit kitchenaid.com/quickstart for additional Instructions with videos, inspiring recipes,
and tips on how to use your Spiralizer attachment.