4
STAND MIXER SAFETY
Electrical requirements
SAVE THESE INSTRUCTIONS
7. The use of attachments not recommended or sold by
KitchenAid may cause re, electrical shock, or injury.
8. Do not use the Stand Mixer outdoors.
9. Do not let cord hang over edge of table or counter.
10. Remove at beater, wire whip, or dough hook from
Stand Mixer before washing.
PARTS AND FEATURES
THIS PRODUCT IS DESIGNED FOR COMMERCIAL USE
Volts: 220-240 A.C.
Hertz: 50/60 Hz
Power: 325 W, Recommended operating
time: 1-30 minutes with a duty cycle of
10-min. ON/ 15 min. OFF.
Do not use an extension cord. If the power
supply cord is too short, have a qualied
electrician or serviceman install an outlet
near the appliance.
The wattage rating is determined by using
the attachment that draws the greatest load
(power). Other recommended attachments
may draw signicantly less power.
This product is supplied with a Y type power
cord. If the power cord is damaged, it must
be replaced by the manufacturer or a service
agent in order to avoid a hazard.
The acoustic pressure level measured in conformity with the prEN 454-test code
is less than 70 dBA.
A * in the model number indicates additional characters that designate machine color
and engineering digits for the actual model (eg. 5KSMC895*).
W10712126A_Final.indd 4 11/18/14 11:42 AM
To Next Page
Loading...
Need help?
General
