KitchenAid KSMFGA - Parts and Features; Food Grinder Attachment; Slicer;Shredder Attachment

GET STARTED
QUICK START GUIDE
In a few easy steps, you’ll be on your way to enjoying something delicious!
For complete instructions and videos, go online to www.kitchenaid.com/quickstart.
3
Insert the attachment shaft Housing into
the attachment hub. Tighten the Stand
Mixer attachment hub knob clockwise until
attachment is secured to the Stand Mixer.
4
Cut food into small strips or pieces sized to fit
into the feed tube.
2
Place the desired Grinding Plate over the
Blade, matching the notch of the plate with
the tab on the bottom of Main Housing.
Turn Collar clockwise by hand until secured
but not tightened.
Tab
Notch
1
Insert the Grind Screw into the Main Housing
securely. Place the Blade over the end of the
Grind Screw.
NOTE: Make sure the sharp side of the Blade
is facing out.
Sharp side
NOTE: Please refer to your Use and Care
Guide for detailed instructions.
5
Turn the Stand Mixer to Speed 4 and feed
food into the feed tube using the Food
Pusher.
Feed Tube