12 | USING THE PASTA PRESS
USING THE PASTA PRESS
3
Insert attachment shaft housing into
the attachment hub, making certain
the power shaft fits into the square
hub socket� If necessary, rotate the
Pasta Press back and forth� The pin
on the attachment housing fits into
the notch of the hub rim when in
the proper position�
4
Tighten the Stand Mixer attachment
hub knob until the Pasta Press
attachment is completely secured
to the Stand Mixer�
2
For Stand Mixers with a hinged attachment hub cover: Flip up to open�
For Stand Mixers with a removable attachment hub cover: Turn the attachment
knob counterclockwise to remove attachment hub cover�
W10829435B_01_EN_v01.indd 12 3/4/16 3:08 PM
To Next Page
Loading...
