ENGLISH
USING THE PASTA PRESS | 11
3
Screw pasta ring onto housing base
until it is seated firmly in place�
1
Rotate cutter away from the housing
base so that the auger may be
inserted� Insert auger into housing
base, cross-tab first� Auger should
settle completely inside of housing�
2
Place selected pasta plate onto
housing base so that the pasta
plate’s tab inserts into auger base�
USING THE PASTA PRESS
ASSEMBLING THE PASTA PRESS
ATTACHING THE PASTA PRESS
1
Turn Stand Mixer off and unplug�
W10829435B_01_EN_v01.indd 11 3/4/16 3:08 PM
To Next Page
Loading...
