14 | USING THE PASTA PRESS
USING THE PASTA PRESS
3
Slowly feed walnut-sized balls
of dough into the hopper; dough
should self-feed through the auger�
Wait until auger is visible before
adding the next piece�
4
Use the combo tool to push dough
only if dough becomes caught in
the hopper and no longer self feeds�
5
Use the cutter to cut pasta at
desired length as it exits the press�
See “Choosing the right pasta plate”
for recommended lengths�
W10829435B_01_EN_v01.indd 14 3/4/16 3:08 PM
To Next Page
Loading...
