To Next PageTo Next Page
Need help?Do you have a question about the KitchenAid KUDE40FXPA4 and is the answer not in the manual?
General| Type | Built-In |
|---|---|
| Color | Stainless Steel |
| Number of Wash Cycles | 6 |
| Number of Place Settings | 14 |
| Drying System | Heated Dry |
| Control Type | Electronic |
| Number of Options | 5 |
| Width | 23.875 inches |
| Depth | 24.5 inches |
| Height | 34.5 inches |
| Energy Star Certified | Yes |
| Third Rack | Yes |
| Stainless Steel Tub | Yes |
| Soil Sensor | Yes |
| Delay Start | Yes |
Explains safety alert symbols, DANGER, and WARNING meanings.
Warns about tip-over hazard when the dishwasher is not fully installed.
Outlines essential requirements for safe installation by qualified personnel.
Lists all tools and parts required for installation.
Details requirements for water, power, drain access, and clearances.
Provides critical dimensions for the installation cabinet opening.
Details the physical dimensions and specific features of the dishwasher.
Details how to connect the drain hose and when an air gap is needed.
Outlines required water pressure, temperature, and tubing types.
Steps to prepare the cabinet opening when utilities are already in place.
Steps to prepare the cabinet opening for new utility connections.
Details options for power supply cord or direct wire connections.
Steps to prepare the cabinet for a power supply cord connection.
Steps to prepare the cabinet for a direct wire electrical connection.
Instructions for drilling holes and measuring the water supply line.
Guides routing, flushing, and fitting the water supply line.
Instructions for connecting the 90° elbow fitting to the water supply.
Details drilling a hole for the drain hose connection.
Guides routing the drain hose through the cabinet.
Provides options for connecting to waste disposer or waste tee.
Details drain hose connection with an air gap.
Steps for applying the moisture barrier under a wood countertop.
Highlights tip-over and heavy lifting hazards during preparation.
Covers placing unit on its back, removing covers, and installing strain relief.
Emphasizes grounding and avoiding adapters/extension cords.
Guides routing the power cord through the strain relief.
Details connecting the ground wire to the terminal box.
Covers connecting black/white wires and securing the cord.
Instructions for closing and securing the terminal box cover.
Guides measuring the opening and using the height adjustment chart.
Step-by-step guide to install the door handle using setscrews.
Provides dimensions for custom dishwasher door panels.
Advises on panel weight and dimensions for custom panels.
Instructions for safely standing the dishwasher upright.
Guides template use, drilling pilot holes for the custom panel.
Covers securing studs, tape, and finally attaching the custom panel.
Covers aligning edges, predrilling, and securing the panel.
Details removing short screws and using long screws for attachment.
Describes inserting and bending brackets for wood/laminate countertops.
Details breaking brackets, removing buttons, and installing brackets on the tub side.
Safely moving the unit into the cabinet opening, checking utilities.
Guides checking and adjusting door spring tension for proper closure.
Instructs on safely sliding the unit into the opening, avoiding hose/wire pinching.
Adjusting the front of the dishwasher to match cabinet doors.
Guides checking for plumb and leveling using adjustable legs.
Instructions for connecting the water supply and verifying for leaks.
Guides attaching the drain hose to the dishwasher's drain connector.
Details final positioning and securing of the drain hose clamp.
Instructions for routing the direct wire cable into the terminal box.
Emphasizes electrical safety for direct wire connections.
Guides connecting ground and remaining wires in the terminal box.
Details securing the cable in strain relief and replacing the terminal box cover.
Verifies alignment, door clearance, and spacing within the cabinet.
Instructions for securing the unit using screws to the countertop.
Ensures side attachments are correct and plastic buttons are replaced.
Instructions for removing the towel and reinstalling the lower dish rack.
Guides placement and securing of the bottom sound pad.
Details steps to verify correct installation and operation.
Provides solutions for common operational problems.
Offers advice on rinse aid, cycle times, and start/resume function.
