21
Using and Caring for Your Oven
5. Start oven.
“Snd” and “Off” will appear on the
display.
Repeat Steps 1-5 to turn the
signals back on.
“Snd” and “On” will appear on the
display.
PRESS
Using the control lock
The control lock prevents unwanted use
of the oven by disabling the control panel
command pads.
NOTES:
• Control lock is only available when oven
is not in use or control has not been set.
• Control lock will not disable the Timer.
• Set control lock when cleaning the con-
trol panel to prevent oven from
accidentally turning on.
To lock or deactivate the
control panel:
1. Open the door.
2. Press and hold Control Lock
(Number Pad 3) for
5 seconds.
A single tone will sound and “START?”
will appear on the display.
3. Press START.
To unlock the control panel:
1. Open the door.
PRESS YOU SEE
PRESS YOU SEE
9753620Av03c72 7/1/99 11:42 AM Page 21
To Next Page
Loading...
