Tips
1. The hot water dispenser has a reminder function,
the last programme will be remembered until the
plug is removed from the socket.
2. If the hot water dispenser fails or does not work
properly, the built-in security function may have
been activated. Easily reset the appliance with the
reset key according to the illustration.
Cleaning
1. Unplug the appliance and let it cool down before cleaning.
2. Descale the appliance with natural agents such as vinegar or citric
acid.
3. Add this to the water and fill the water tank to MAX.
4. Select 100ºC and 000 volume and operate 2/3 times on this setting
to rinse everything thoroughly.
5. Clean the outside with a slightly damp cloth.
6. Empty the drip tray by gently lifting it.
7. After cleaning, remove the drain plug at the bottom of the appliance
to remove all water residues. Connect it properly after emptying.
11.
Reset-hole
Drainage stopper
To Next Page
Loading...