Press again，to choose time，The
time will blink on the display, Use or
to change the time (0:30–48:00)
After finish setting all time and
temperature , wait for 3 seconds , the
product will start working automatic.
When the timer finishes, the display will
show “--:--” and heat will turn o. The
dehydrator will beep 5 times, and the fan
will stop, and after 30 minutes, the power
will be o .
Use a kitchen towel, heat-resistant glove,
or oven mitt to handle the trays.
Place food on trays. Rearrange the trays to
fit thicker food items.
To avoid scratching the inside of your
dehydrator, insert the mesh screen with the
smooth side of the frame facing down.
Time changes in 30-minute increments.
Press and hold or to change the time rapidly.
After you finish choose the temperature ,
The dehydrator will switch to time mode after
3 seconds automatic too if you don’t press
again
The dehydrator will always remember
your previous temperature and time settings.
Temperature changes in 1°F increments.
Press and hold or to change the
temperature rapidly.
Plug in. The dehydrator will beep, and the
display will show “--:--”And then press ,
the display will show 35℃，30 minutes，
and the temperature & time will blink 3
seconds in turn .When the time or
temperature light blink, you can set the
time and temperature,if you don't do any
operation , then the dehydrator will start
work.
Press to choose to choose ℃ or ℉,
Temperature
Range:35℃-70℃ and 95 ℉ -158℉
Press once，to choose temperature，
The temperature will blink on the display,
Use or to change the temperature
(95°F–158°F / 35–70°C).
To Next Page
Loading...