Kitsound BOOM DAB - Advanced Menu Functions; Alarm and System Settings

10 11
[...continued] Menu
Setting Alarm 1
1. Short press the ALARM/SNOOZE button (8), and press Next Track (11) to ‘ON’
2. Click the MFB (7) and it will select the hour
3. Use Next Track (11) or Previous Track (5) to adjust the hour and click the MFB (7) on your desired hour
4. Use Next Track (11) or Previous Track (5) to adjust the minutes and click the MFB (7) on your desired minute
5. Use Next Track (11) or Previous Track (5) to change the alarm mode (Daily, Once, Weekends, Weekdays) and
click the MFB (7) on your desired option
6. Use Next Track (11) or Previous Track (5) to change the type of alarm (DAB, FM, Buzzer 1, Buzzer 2) and
click the MFB (7) on your desired option
7. The alarm will now be set. To Cancel alarm, short press Alarm/Snooze (8) and press Next Track (11) to ‘OFF’
Note: The clock icon will always ash on the display during the alarm setting process. In alarm mode, if you don’t
begin setting the alarm within 3 seconds, the Boom DAB will exit alarm mode.
Setting Alarm 2
1. Short press Alarm/Snooze (8) twice to select Alarm 2
2. Follow instructions from ‘Setting Alarm 1’
Language
• Follow the instructions in ‘Menu’
• Use Next Track (11) or Previous Track (5) until you nd ‘Language’
• Click the MFB (7) to select option
• Use Next Track (11) or Previous Track (5) until you nd your desired language
• Click the MFB (7) to select option
Factory reset
Doing a factory reset will completely wipe all saved data on the Boom DAB. It will reset all Sleep settings, Alarms, Languages,
Time and Date and Presets.
• Follow the instructions in ‘Menu’
• Use Next Track (11) or Previous Track (5) until you nd ‘Factory Reset’
• Click the MFB (7) to select option
• Use Next Track (11) or Previous Track (5) to select either ‘Yes’ or ‘No’
• Click the MFB (7) to select option
SW version
SW version shows you what software the Boom DAB is running on.
• Follow the instructions in ‘Menu’
• Use Next Track (11) or Previous Track (5) until you nd ‘SW Version’
• Click the MFB (7) to select option
[continued...]