12 13
[...continued] Menu
Listening to FM radio
• Fully extend the telescopic antenna
• Click Mode (9) until you reach FM on the LCD Display (1)
• Press and hold Next Track (11) or Previous Track (5) to search the station, and the Boom DAB will automatically stop with
every station it nds
• Short press Next Track (11) or Previous Track (5) for ne tuning
Presetting stations in the FM radio memory
• In FM playing mode, nd the desired FM station
• Press and hold Preset (6) until ‘PRESET STORE’ is shown and “1çemptyè” will show on the display. Use Next Track (11)
or Previous Track (5) to choose the number you want for this station
• Press the MFB (7) to save station as that number
• Repeat the steps above to store up to 20 stations in the memory
Recalling FM preset stations
In FM playing mode, press Preset (6) so that ‘PRESET RECALL’ shows on the display, click Next Track (11) until you reach your
desired station, and click the MFB (7) to select station.
FM Menu
1. Scan Settings
• Press the Menu button (10) and use Next Track (11) or Previous Track (5) until you reach Scan settings
• Press the MFB (7) to scan settings
• Press Next Track (11) to change between strong stations only, or all stations
• Press the MFB (7) on desired option
2. System
• Press the Menu button (10) and use Next Track (11) or Previous Track (5) until you reach System
• Press the MFB (7) to select system and this will take you to the system menu
3. Audio settings
• Press the Menu button (10) and use Next Track (11) or Previous Track (5) until you reach Audio Settings
• Press Next Track (11) to change between forced mono or stereo
• Press the MFB (7) on desired option
Note: You should always be in stereo mode. Forced mono is used when you have a weak signal and the radio
is struggling to connect. When this happens, you should change mode.
[continued...]
To Next Page
Loading...