Kitsound BOOM DAB - DAB Radio Operations; DAB Station Management

14 15
[...continued] Menu Removing DAB stations
If a station shows up but the Boom DAB can’t connect, you can delete these stations.
• Press the Menu button (10)
• Use Next Track (11) or Previous Track (5) until you reach option ‘Prune’
• Press the MFB (7) to select the ‘Prune’ option
• Press Next Track (11) to select ‘Yes’ and click the MFB (7) to ‘Prune’
Presetting stations in the DAB radio memory
• In DAB playing mode, nd the desired DAB station
• Press and hold Preset (6) until ‘PRESET STORE’ is shown and “1çemptyè” will show on the display. Press Next Track (11)
to choose the number you desire for this station
• Press the MFB (7) to save station as that number
• Repeat the steps above to store up to 20 stations in the memory
Recalling DAB preset stations
In DAB playing mode, press Preset (6) so that ‘PRESET RECALL’ shows on the display, click Next Track (11) until you reach
your desired station, and click the MFB (7) to select station.
[continued...]
Listening to DAB broadcast
• Fully extend the telescopic antenna
• Click Mode (9) until you reach DAB on the LCD display (1)
• The Boom DAB will automatically search for a station
• Once scan is complete the Boom DAB will select the rst station on the list and will automatically set the time and date.
This will show on the LCD display (1)
• To change station please click Next Track (11) or Previous Track (5)
• To select station please click the MFB (7) once on desired station
• If no stations are detected the LCD display (1) will read ‘NO DAB Station’
Note: Try another area if no station is found.
Manual tune DAB
• Press the Menu button (10) and click Next Track (11) until you reach option ‘Manual Tune’
• Press the MFB (7) to select ‘Manual Tune’
• Press Next Track (11) or Previous Track (5) to display a specic channel/frequency
• Press the MFB (7) to tune your desired station.