USER MANUAL
BOOMBAR
WIRELESS
SPEAKER
Li-PO
Do not dispose of Lithium Polymer
batteries with general waste.
Please return it to battery recycling
collection point
Bluetooth v2.1, A2DP, AVRCP
Bluetooth range up to 10 m
Output RMS 2 x 2 W @ 4 ohm
S/N 85 dB
Play time up to 20 hours
Charging time up to 3 hours
PLEASE NOTE:
Your device will have an internal amplifier and if it is playing
digital files like MP3s it will also have an integrated DAC
(Digital Audio Converter). If you turn up the volume to
100%, your device will be sending distorted signals to the
BoomBar. To avoid this and to get the best sound quality
from the speaker, we recommend that you do not run your
device any higher than 95% volume.
Hands-free
The speaker comes equipped with a microphone so you
can take phone calls whilst connected. Should you receive
an incoming phone call, the Play/Pause button (6) becomes
an Answer/End call button. If you receive a call whilst
music is playing, press the Play/Pause button to answer.
To end the call, press the Play/Pause button again and your
music should resume playing (dependant on device).
Troubleshooting
We hope you’ve now got all the information you need to
get started, but if you’re having problems with anything,
please feel free to contact us on: support@kitsound.co.uk
JB. 2586 / Made in China. © KitSound
™
2013
Christchurch, Dorset. BH23 4FL
Please recycle this packaging responsibly.
kitsound.co.uk
To Next Page
Need help?
General
