Kitsound Evoke - Audio Modes and Connectivity; Using Bluetooth Audio; MP3 Player Mode

To Next Page

To Previous Page

12 13

Using Bluetooth

Playing audio wirelessly

1. Follow the instructions in the ‘Pairing a Bluetooth device’ section

2. Use the controls on your device to select a track

3. To play or pause the selected track, use the controls on your device or press the Play/Pause button (6)

4. To skip a track, use the controls on your device or press (don’t hold) the previous track button

(8 on Evoke, 13 on remote) or next track button (9 on Evoke, 16 on remote)

5. Audio played on the connected Bluetooth device will now be heard through the speakers

6. The volume can be adjusted both on your device and on the Evoke. To change the volume on the Evoke,

press and hold the Volume – (8) and Volume + (9) buttons.

Note: Track control functions from the buttons on the Evoke and on the remote will require your device to

have Bluetooth proﬁle AVRCP. Please check your device’s manual if unsure.

MP3 player mode

The Evoke will play MP3 ﬁles from most USB memory sticks (up to 32 GB). Using a computer,

copy the desired music ﬁles onto a USB memory stick. Then:

1. With the Evoke in Bluetooth mode, press the mode button (5)

2. The LED indicator (1) will turn pink

3. Connect your USB memory stick to the USB port (3) on the Evoke

4. After a few moments, the Evoke will automatically start playing music

5. Track/volume controls on the Evoke and on the remote are the same in MP3 player mode as

they are in Bluetooth mode

6. The Repeat (15) and Random (18) buttons on the remote will function only in MP3 player mode

Note: Only MP3 ﬁles are compatible with the Evoke.