8 9
Listening to FM radio
• Switch the POWER button to the on position and press the VOLUME button to turn on the unit
• Press the MODE button to select the FM mode, which will be indicated on the display
• Press the SCAN button to search for a station automatically
• To stop the scan, rotate the SELECT dial in any direction
• You can manually select a frequency by turning the SELECT dial
• Press the INFO button for radio station data, such as station name, mono or stereo etc.
Presetting stations in the FM radio memory
• In FM playing mode, find the desired FM station
• Press and hold the PRESET button until ‘PRESET STORE’ is shown and ‘1<empty>’ flashes on the display. Then rotate the SELECT dial
to store the station to a number between one and 10 and press the SELECT dial to confirm
• Repeat the steps above to store up to 10 stations in the radio’s memory
Recalling preset stations
In playing mode, press the PRESET button so that ‘PRESET RECALL’ shows on the display and rotate the SELECT dial to play the desired
preset FM station.
Listening to DAB broadcast
• Switch the POWER button to the on position and press the VOLUME button to turn on the unit
• Press the MODE button to select the DAB mode, which will be indicated on the display
• The Jive will scan the DAB stations automatically
• To manually scan for channels, press the SCAN button
• Search for a station by rotating the SELECT dial and then press it to select the station
• Press the INFO button for DAB radio station data, such as radio station name, mono or stereo etc.
Presetting stations in the DAB radio memory
• In DAB playing mode, find the desired DAB station
• Press and hold the PRESET button until ‘PRESET STORE’ is shown and ‘1<empty>’ flashes on the display. Then rotate the SELECT dial
to store the station to a number between one and 10 and press the SELECT dial to confirm
• Repeat the steps above to store up to 10 stations in the radio’s memory
Recalling DAB preset stations
In playing mode, press the PRESET button so that ‘PRESET RECALL’ shows on the display and rotate the SELECT dial to play the desired
preset DAB station.
Setting the date and time
By default, the KS Jive will automatically update the time over FM or DAB. However you can still set the time manually. To do this:
• In DAB or FM mode, press the MENU button to find SYSTEM
• Rotate the SELECT dial to find TIME
• Press SELECT to find ‘set time’. The hour digit will flash
• Rotate the SELECT dial to confirm the hour. The minute digits will flash
• Rotate the SELECT dial to confirm the minute
• Once you have set the time, ‘set date’ will show on the display. Repeat the steps above to set the date
To Next Page
Loading...