Kitsound XDOCK Qi User Manual

JB. 6808-a / KDOCKQI / REG02 / Made in China. © KitSound is a trademark of Kondor Limited, 2019. Christchurch, Dorset, BH23 4FL, UK
The Bluetooth
®
word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Kondor Ltd. is under license. Other trademarks and trade names are those of their respective owners.
The ‘Qi’ symbol is a trademark of the Wireless Power Consortium.
All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their
use does not imply that the trademark owner is aliated with KitSound or endorses the products herein.
Products showing the ‘Crossed Through’ wheelie bin symbol must be recycled separately from household waste at the
end of their useful life. Please DO NOT dispose of this appliance in normal household waste. Your local appliance retailer
may operate a ‘take-back’ scheme when you are ready to purchase a replacement product, alternatively contact your
local government authority for further help and advice on where to take your appliance for recycling.
Please recycle this packaging responsibly. Your product and batteries must be recycled or disposed of properly.
WARNING: This product can expose you to chemicals including LEAD which is known to the State of
California to cause cancer and reproductive toxicity. For more information, go to www.P65Warnings.ca.gov
kitsound.co.uk
USER MANUAL
XDOCK Qi
Qi CHARGING
BLUETOOTH
®
SPEAKER DOCK

Kitsound XDOCK Qi Specifications

General

Wireless Charging	Yes
Power Supply	5V/2A
Type	Docking Station
Compatibility	Qi-enabled devices
Audio Output	3.5mm

Summary

Important Safety Precautions

General Usage Warnings

Essential safety guidelines to prevent damage or injury during operation.

Setup, Indicators, and Reset

Backup Battery Installation

Step-by-step guide for installing batteries to preserve settings.

Factory Reset Procedure

Instructions to restore the device to its default factory settings.

Basic Operation and Charging

Powering On/Off and Standby

How to turn the device on, off, and put it into standby mode.

Qi Wireless Charging Guide

Instructions for placing devices on the Qi charging area for wireless power transfer.

Optimizing Qi Charging

Tips to ensure efficient charging and avoid issues like slow charging.

Clock, Alarms, and Charging Behavior

Setting the Clock

Configuring Alarms

Guides on setting up both Alarm 1 and Alarm 2 with wake-up options.

Audio Playback and Controls

Bluetooth Pairing and Playback

Steps for connecting devices via Bluetooth and controlling music playback.

Audio Input Modes

FM Radio Recall and Specifications

Technical Specifications

Troubleshooting and Compliance

FCC Compliance and Interference