- 2 -
About this Users manual
With the help of this Users manual we will introduce
your new Kittec
-X-LINE kiln.
Please read this Users manual before your first firing to
familiarise yourself with the operation of the kiln and the
controller. Please take particular note of the Safety tips
and Advice to guarantee successful and safe firing.
Should there still be a problem, we have listed some
possible solutions in another section entitled “What if
….?”
Use of the kiln
The electric Kittec
-
X-LINE kilns are built in
accordance with German Law VDE (association for
electrical, electronic and information technologies) ,
exclusively for the purpose of firing, thermal treatment
and/or melting of ceramics, china, enamel, glaze and/or
glass. The maximum temperature in the firing chamber
of the kiln is 1300°C.
The melting temperature of glazes and the vitrification
temperature of the clays used will dictate the firing
temperature required, invariably less than 1300 °C.
Safety tips
Do not open when hot! Hot surface
(firing chamber > 50 °C)
Before opening Dangerous electric
To Next Page