Kitvision JB 3822 - User Manual

Box Contents
• Bluetooth Selfie Stick
• Micro USB cable
• Phone holder
Functions
1. Phone holder
2. ¼" tripod screw
3. Tripod screw dial
4. Bluetooth Selfie Stick head
5. Head side-screw
6. Telescopic section
7. Rubber grip
8. Camera remote button
9. LED indicator
10. Micro USB port
11. Power switch
User Manual
Bluetooth Selfie Stick
Please read this manual carefully before use.
Charging
1. Using the micro USB charging cable, connect the micro USB connector
to the micro USB port (10) on the base of the Bluetooth Selfie Stick
and the other to a PC USB port or USB mains charger.
2. The LED indicator (9) will illuminate solid red on the base whilst charging.
3. When fully charged the LED indicator (9) will turn off.
Operation
1. Turn the Bluetooth Selfie Stick on by sliding the power switch (11)
to the ON position.
2. Make sure your smartphone is turned on and Bluetooth is activated
3. Open the Bluetooth settings on your smartphone and connect to
‘KV Selfie Stick ’.
4. Open your smartphone’s camera application.
5. Place your smartphone in the provided phone holder, ensuring it is
well secured.
6. Attach the phone holder to Bluetooth Selfie Stick by screwing it onto
the ¼" tripod screw (2), tighten fully using the tripod screw dial (3).
7. Adjust the tilt of the Bluetooth Selfie Stick head (4) to gain the
desired angle and tighten using the head side-screw (5).
8. Extend the Bluetooth Selfie Stick by pulling the telescopic section
outwards (6)
9. Press the camera remote button (8) to take a photo.
10. Slide the power switch (11) to the OFF position to turn the Bluetooth
Selfie Stick off when finished.
ONOFF
1
3
5
7
9
11
2
4
6
8
10

Summary

Charging the Bluetooth Selfie Stick

Operating the Bluetooth Selfie Stick

Pairing and Re-pairing Devices

Troubleshooting Common Issues

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The Kitvision Bluetooth Selfie Stick is a portable device designed to help users take photos and videos from extended angles using their smartphone or compatible camera. It features a telescopic design, allowing for adjustable length, and integrates Bluetooth connectivity for remote shutter control.

Function Description

The primary function of the Bluetooth Selfie Stick is to extend the reach of a smartphone or camera, enabling wider-angle selfies, group photos, and shots from unique perspectives that would be difficult to achieve with an arm's length. It connects to a smartphone via Bluetooth, allowing the user to trigger the camera shutter remotely by pressing a button on the stick's handle.

The device includes a phone holder that securely grips smartphones, and this holder can be attached to the selfie stick's ¼" tripod screw. This screw is also compatible with most action cameras and digital cameras, broadening the device's versatility. The head of the selfie stick is adjustable, allowing users to tilt and lock it at a desired angle using a head side-screw.

For operation, the user first turns on the selfie stick, ensures Bluetooth is active on their smartphone, and then pairs with the device named 'KV Selfie Stick'. Once paired, the smartphone's camera application can be opened, and photos can be taken by pressing the camera remote button on the selfie stick's rubber grip. The telescopic section can be extended outwards to achieve the desired length.

The selfie stick is powered by an internal battery, which is charged via a micro USB port located at the base. An LED indicator provides feedback on charging status, Bluetooth pairing, and low power.

Important Technical Specifications

• Bluetooth Version: V2.1
• Length (collapsed): 23 cm
• Length (extended): 100 cm
• Weight: 160 g
• Battery: 3.7 V, 45 mAh
• Charging Time: 1 hour
• Standby Time: 100 hours
• Camera Screw: ¼" (compatible with most action cameras and digital cameras)
• Smartphone Width Compatibility: 55 mm – 75 mm
• Max Camera Weight: 500 g
• Telescopic Sections: 7
• Supported Operating Systems: Bluetooth compatible Android (3.0 and above) and iOS (4.0 and above) devices.
• LED Indicator: Provides status for charging (solid red), fully charged (off), photo taken (flashes once blue), Bluetooth pairing successful/wake up (fast flashing blue), Bluetooth pairing activated (middle speed flashing blue), and low power (slow flashing blue).

Usage Features

• Easy Pairing: Simple Bluetooth pairing process with 'KV Selfie Stick' name.
• Remote Shutter Control: Integrated camera remote button (8) for convenient photo taking.
• Adjustable Angle: The head of the selfie stick (4) can be tilted and secured with a head side-screw (5) to achieve optimal shooting angles.
• Extendable Design: Seven telescopic sections (6) allow for a collapsed length of 23 cm and an extended length of 100 cm.
• Universal Compatibility: The ¼" tripod screw (2) and adjustable phone holder (1) accommodate smartphones between 55-75mm width, as well as most action and digital cameras up to 500g.
• Power Management: Features a power switch (11) to turn the device ON/OFF and an automatic sleep mode after 2 hours of inactivity to conserve battery.
• Charging Indicator: LED (9) shows charging status (solid red) and full charge (off).
• Troubleshooting for Android: For some Android phones where the camera button doesn't take a picture, users may need to adjust camera settings to change the 'volume button function' to capture, or download the 'Camera 360' app to customize button functions.
• Keyboard Conflict Note: The selfie stick may conflict with some smartphone keyboards; disconnecting or turning off the selfie stick is recommended if this occurs.

Maintenance Features

• Charging: Charge the device using the provided micro USB cable connected to the micro USB port (10) and a PC USB port or USB mains charger. The LED indicator (9) will be solid red during charging and turn off when fully charged.
• Care Instructions (Don'ts):
  • Do not dismantle the Bluetooth Selfie Stick.
  • Do not use corrosive solvent to clean the device.
  • Do not operate or charge the device under high temperatures or strong light.
  • Do not operate the device in the rain or if it is wet.
  • Do not use the device near fire.
• Battery Disposal: Lithium-ion batteries should not be disposed of with general waste; they should be returned to a battery recycling collection point.
• Packaging Recycling: The packaging is designed to be recyclable.
• Warranty: The warranty is limited to defects caused by faulty manufacture or materials. No warranty is given for devices subsequently attached to the selfie stick. Users are advised to ensure their phone or other device is properly fitted before use to prevent damage.

Kitvision JB 3822 Specifications

General

Brand	Kitvision
Model	JB 3822
Category	Cell Phone Accessories
Language	English