Kitz 150 SCTBZ Series User Manual

DocumentNo.：KE-1027-00                                       Sheet:9/29

Ⅲ Shipping,HandlingandStorageofValves

2. Storage

2.1 CareforValveStorage



(1) DO NOT storage valves in the corrosive environment, which may cause
corrosiononthreadedportionsofvalves.
(2) DONOTremoveprotectivecoversuntilinstallation.Astheywillpreventthe
intrusionofanyforeignobject,theremovalofcoverscouldcausedamageto
theclosureelementssuchasballandseats.
(3) DO NOT fall, drop, give mechanical impact or place any other objects on
valves,andDONOTsteponthem,whichmaydamagevalves.
(4) DO NOT carelessly pile up products to avoid risk of product damage and
personalinjurycausedbyunstablepiling.

(5) Keep the valves in the open position during storage. Storing the valves in
halfway position may deform the ball seats, leading to the internal leakage.
Andstoringthevalvesinthefullyclosedpositionmaydamagetheball,when
theflangeprotectionsorcoversaretornorremoved.

2.2 Storage

2.2.1 Indoor storage of valves in a dust-free, low humidity and well ventilated places is
recommended.

2.2.2 Storageofvalvesdirectlyonthegroundorconcretefloorisnotrecommended.Place
packedvalvesontheracksforstorage.

2.2.3 Take appropriate measures to prevent valves from direct exposure to dust, rain and
sunlight,ifvalvesshouldbestoredoutdoors.





Kitz 150 SCTBZ Series Specifications

General

Brand	Kitz
Model	150 SCTBZ Series
Category	Control Unit
Language	English