How to fix Klarfit Tracker Tracker not finding my position?
Ensure you are using your Klarfit GPS Tracker in an open area with a clear view of the sky, and that the LCD screen is facing upward. This will help the device acquire a GPS signal and determine your location.
Why is my Klarfit Tracker Tracker sometimes fast and sometimes slow?
The speed of your Klarfit GPS Tracker depends on whether it has been used in open sky within the past two hours. If so, it will work fast. Otherwise, you might need to wait 30-40 seconds to find your position. It will take even longer (a few minutes) if you are under tree shade, inside a tall building, or in places with a weak GPS signal.
What to do if my Klarfit Tracker compass is not working correctly?
If the compass on your Klarfit GPS is working incorrectly, it might be due to metal interference. The Tracker uses a magnetic sensor that is easily affected by metals. Calibrate the compass on the Tracker and make sure that there are no metal objects nearby.
Why is the Klarfit Tracker direction incorrect in a slowly moving car?
When the speed is below 10km/h, the Klarfit GPS Tracker calculates the direction of the destination using its built-in digital compass. To ensure correct direction, place the Tracker horizontally in the car, so it will point to the destination correctly.
Instructions for the initial setup and powering on of the GPS Tracker.
Guide on accessing the device's menu system using the control keys.
Details on using the tracker for sports activities and viewing data like distance and speed.
Information on planning routes using PC software and uploading them to the tracker.
Instructions for saving and managing Points of Interest (POI) with geotagging.
How to access and view past recorded data, including distance, pace, and calories.
Overview of extra features such as pedometer, barometer, and weather station.
Guide to configuring device settings like display, time, units, and system preferences.
Description of the screens showing distance, average speed, and duration of training.
Procedure for saving Points of Interest (POI) during tracking activities.
Instructions for calibrating and using the compass function.
Details on altitude and atmospheric pressure readings, plus altimeter calibration.
Configuration options for data logging, including rules and deletion.
Adjusting display settings like backlight, contrast, and always-on options.
Settings for automatic or manual power off.
Configuring time format, daylight saving, and time display.
Selection of measurement units for the device.
Choosing the user interface language.
Restoring the device to its default factory settings.
To Next Page
General