Need help?Do you have a question about the Klark Teknik 2A-KT and is the answer not in the manual?
General| Input Impedance | 600 ohms |
|---|---|
| Maximum Output Level | +16 dBu |
| Power Supply | Standard IEC connector |
| Channels | 1 |
| Tubes | 1 x 12AX7, 1 x 12BH7, 1 x EL84 |
| Rack Spaces | 2U |
| Type | Compressor |
| Gain | 40 dB |
| Controls | Gain, Peak Reduction |
| Inputs | XLR, 1/4" TRS |
| Outputs | XLR, 1/4" TRS |
| Sidechain I/O | 1/4" TRS |
| THD | <0.5% |
| Dimensions | 19" x 3.5" x 6.5" |
| Output Impedance | 600 ohms |
Covers LIMIT/COMPRESS, OUTPUT GAIN, and PEAK REDUCTION controls for audio processing.
Explains VU METER, METER SELECT, METER CALIBRATION, and STEREO LINK functions.
Details the INPUTS and OUTPUTS connectors on the rear panel.
Guidance on online registration, warranty claims, and troubleshooting via online support.
Instructions for connecting to mains power, voltage checks, and fuse replacement.
To Next Page