Need help?Do you have a question about the Klark Teknik DN780 and is the answer not in the manual?
Primary control unit, handles user interface, remote interface, and DSP board control.
High-speed digital signal processor for reverberation and audio processing algorithms.
Addresses issues where the unit has no display and no audio output.
Details causes and solutions for Error 1, related to program memory.
Details causes and solutions for Error 2, related to DSP IC verification.
Details causes and solutions for Error 3, related to DSP coefficient verification.
Primary control unit, handles user interface, remote interface, and DSP board control.
High-speed digital signal processor for reverberation and audio processing algorithms.
Addresses issues where the unit has no display and no audio output.
Details causes and solutions for Error 1, related to program memory.
Details causes and solutions for Error 2, related to DSP IC verification.
Details causes and solutions for Error 3, related to DSP coefficient verification.
General| Type | Digital Reverb |
|---|---|
| Bit Depth | 24-bit |
| Reverb Algorithms | 8 |
| Frequency Response | 20 Hz - 20 kHz |
| THD | < 0.01% |
| Input Impedance | 10 kΩ |
| Power Consumption | 15 W |
| MIDI Control | Yes |
| Sampling Rate | 48 kHz |
| Algorithms | Hall, Plate, Room |
| Inputs | 2 x XLR |
| Outputs | 2 x XLR |
| Dimensions | 483 x 44 mm |
To Next Page
