Klark Teknik DN9848E - Remote Control Setup; Connecting HELIX DN9848 E units in a daisy chain; Connecting HELIX DN9848 E units to an Ethernet switch or hub

Remote Control Setup
33
9.2.1 Connecting HELIX DN9848E units in a daisy chain
The diagram below shows a typical example of the HELIX DN9848E units connected in a daisy chain
configuration.
9.2.2 Connecting HELIX DN9848E units to an Ethernet switch or hub
The diagram below shows each HELIX DN9848E unit directly connected to an Ethernet switch or hub,
which is then connected top a laptop/PC.