EasyManua.ls Logo

Klarstein 10032190 - Packing and Placement Guidelines; Door Handle Installation

Klarstein 10032190
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
EN
BEFORE FIRST USE
Before use, remove all packing materials, including bottom cushions, foam pads
and tapes inside of the refrigerator; tear off the protective lm on the doors and the
refrigerator body.
Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or
watery places to prevent rust or reduction of insulating effect.
Do not spray or wash the refrigerator; do not put the refrigerator in moist places
easy to be splashed with water so as not to affect the electrical insulation properties
of the refrigerator.
The refrigerator is placed in a well-ventilated indoor place; the ground shall be at,
and sturdy (rotate left or right to adjust the wheel for levelling if unstable).
The top space of the refrigerator shall be greater than 30cm, and The refrigerator
should be placed against a wall with a free distance more than10cm to facilitate
heat dissipation.
INSTALLATION
Door handle installation
Tools to be provided by the user: Cross screwdriver

Related product manuals