Klarstein 10032997 - Adaptive Start Function

25
EN
Adaptive Start [Temp.]
Note: The room temperature can be set without switching on the heating.
Use the TEMP button to set the room temperature to 18°C (65°F), 21°C (70°F),
24°C (75°F), 27°C (80°F) or 30°C (85°F).
• Press the TEMP button or the TIMER button until the corresponding room
temperature is selected. Press the HEAT button to conrm.
• Press the ON/OFF button to cancel or turn off Adaptive Start.
Note: Press and hold the TEMP button for 2 seconds to switch between °C and °F.
This is how the Adaptive Start function works:
• If the room temperature is lower than the set temperature, the heating starts
automatically.
• If the room temperature is higher than the set temperature, the heating is
automatically switched off.
Note: Settings in this mode can affect the Week Timer function.