34
EN
3. Place a coee cup on the removable drip tray and align it with the coee
spout.
4. Plug the power cord into a grounded mains outlet.
5. Press the On/O button. All indicator lights will ash and the appliance will
start preheating. When the indicator lights are solid, preheating is complete.
6. Once the preheating is complete, turn the steam knob anti-clockwise until
it stops. The electric pump will turn on. Wait for the steam wand to produce
a steady ow of hot water for at least 30 seconds (this process takes
1-2 minutes). Then turn the steam knob back o.
7. Press the double cup button to dispense hot water to clean the lter screen
and cup.
To Next Page
Loading...
