List of Main Parts
1. Display window
2. Operation buttons (Incl. Power button ON-OFF, mode button, + and – button)
3. Mesh grill
4. Mica heating element
5. On/off switch
6. Plastic side panel
7. Leg support
8. Castor
Technical Specifications
Operation
1. Collecting the plug to the charge with VAC 230V.
2. Press down the “On/off” switch down on the right side panel (plastic side panel), then the heater will
connect to electricity.
3. Then start to set the heat as your requirement.
Press the “Power” button on the right front display or the “On/Off/Power” button on the remote
control to choose power 1200 or 1500W:
- sign mean the lower power 1200W
- sign means the high power 1500W
Press the “Mode” button plus “+” and “-“ to set the timer and room temperature.
+ = to increase
temperature
- = to decrease
temperature
To Next Page
Loading...
Need help?
General