What to do if my Klarstein KRAFTWERK SMART does not run?
If your Klarstein Air Conditioner doesn't run, first, check if it's properly plugged in. Also, verify if there is a power failure in your location. Check if the ‘comp / full water’ indicator is flashing. Ensure that the room temperature is not below the set temperature on the unit.
Why my Klarstein Air Conditioner seems to do little?
If your Klarstein Air Conditioner seems to do little, consider these points: Ensure that direct sunshine is not affecting the unit's performance by drawing the curtain. Check if too many windows or doors are open, and see if there are too many people in the room. Also, identify if something in the room is producing a lot of heat.
What to do if my Klarstein KRAFTWERK SMART seems to do nothing?
If your Klarstein Air Conditioner seems to do nothing, check if the filter is dusty or contaminated. Also, make sure that the air intake or output is not blocked up. Ensure that the room temperature is not below your selected temperature.
How to fix a noisy Klarstein KRAFTWERK SMART?
If your Klarstein Air Conditioner is too noisy, check whether the machine is positioned unevenly, creating vibration. Also, verify if the floor underneath the machine is uneven.
What to do if the compressor does not operate in Klarstein KRAFTWERK SMART Air Conditioner?
If the compressor of your Klarstein Air Conditioner does not operate, it is possible that the overheat protection of the compressor is activated. Wait for the temperature to drop.
General| Refrigerant | R290 |
|---|---|
| Timer | Yes |
| Functions | Cooling, Dehumidification, Fan |
| Smart Features | Wi-Fi |
| Noise Level | 65 dB |
Procedures and warnings for dealing with device damage.
Identification and function of control panel buttons and indicators.
Instructions for powering the unit on and off.
How to select operating modes like automatic, cooling, fan, or dehumidify.
How to adjust the desired temperature setting.
How to select fan speed (high, medium, low).
How to set the operating timer for automatic shutdown.
Information on error codes and self-diagnostic features.
Solutions for frequent issues like unit not running or being noisy.
Explanation of error codes displayed by the unit.
To Next Page