What to do if the ice cannot be removed from Klarstein Sweet Sundae Ice Cream Maker?
If you're having trouble removing the ice after making ice cream with your Klarstein Ice Cream Maker, it might be too hard. Try waiting until the ice melts a bit before attempting to remove it.
Why the handle cannot be inserted properly into Klarstein Ice Cream Maker?
If the handle of your Klarstein Ice Cream Maker won't insert properly during assembly, the mixing fan blade might not be mounted correctly. Make sure to install the fan blade on the drive shaft bore.
General| Display | LCD |
|---|---|
| Cable length | 1.23 m |
| Product type | - |
| Bowl capacity | 1.5 L |
| Number of bowls | - bowls |
| Built-in display | Yes |
| Preparation time | 40 min |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 Hz |
| Product color | Black |
Weight and Dimensions| Depth | 415 mm |
|---|---|
| Width | 280 mm |
| Height | 470 mm |
| Weight | 17100 g |
| Package depth | 500 mm |
| Package width | 450 mm |
| Package height | 19100 mm |
| Package weight | 350 g |
Steps for preparing ice cream, including installing the fan blade and adding ingredients.
Connect the appliance to the power socket and switch it on.
Turn the appliance on using the ON/OFF switch.
Adjust time using buttons and select the purification function.
Initiate ice cream making, adjust time, and use pause functionality.
Use the built-in cleaning mode with water for the appliance.
Remove and clean the handle unit components.
Provides basic and specific recipes for strawberry, mango, and milk ice cream.
To Next Page
