Why is my Klarstein VICTORIA Hob not ignited?
If your Klarstein Hob isn't igniting, there could be several reasons. First, check the electricity supply. It's also possible that the gas supply is closed, so ensure it is fully open. Finally, the burner lid might be badly assembled; make sure it is correctly assembled.
Why is the flame yellow on my Klarstein VICTORIA?
If the flame on your Klarstein Hob is yellow, it's likely that the holes in the flame spreader are clogged. Clean the flame spreader to resolve this issue.
What to do if the Klarstein VICTORIA flame goes out during use?
If the flame on your Klarstein Hob goes out while cooking, the flame supervision device may be contaminated; clean it. Alternatively, the product being cooked might have boiled over, extinguishing the flame; in this case, turn off the burner knob, wait one minute, and reignite the zone. A strong draught could also be the cause; turn off the zone, check the cooking area for draughts like open windows, wait one minute, and reignite the zone.
What to do if Klarstein VICTORIA is badly ignited?
If your Klarstein Hob is badly ignited, several factors could be responsible. Ensure the gas supply is fully open. Check that the burner lid is correctly assembled. If the ignition plug is contaminated, wipe it with a dry cloth. If the burners are wet, dry them carefully. Lastly, if the holes in the flame spreader are clogged, clean the flame spreader.
Why Klarstein VICTORIA Hob makes noise when combusted and ignited?
If your Klarstein Hob is making noise when combusted and ignited, the burner lid may be badly assembled. Make sure to assemble the burner lid correctly.
Details the included accessories like brackets and screws.
Explains symbols for gas off, maximum, and minimum flame settings.
Step-by-step guide on how to light a burner, including safety device operation.
Instructions for cleaning pan supports, control handles, and burners.
Guidance on cleaning the hob's top surface and its stainless steel parts.
Important safety precautions to follow during appliance installation.
Specifies required clearances around the appliance and for cooker hoods.
Details on connecting the gas supply and adjusting gas settings.
Key considerations and safety notes for dismantling the appliance.
Contact details for the manufacturer and UK importer.
To Next Page
General