Klarstein Vinsider 36 - Operation; Control panel

35
EN
OPERATION
1. Cleaning the compartment
Before power on, clean inside of the appliance and check the drainage pipe in
good connection. For details, please refer to the “Maintenance and cleaning”.
2. Placement
Before power on in the rst time, keep it static at least 30 minutes.
3. Power on
The appliance start operation and it will cool down inside after 1 hour,
otherwise you should check the power connection.
Control panel
LIGHT UP DOWN
DISPLAY
ON/OFF
ON/OFF
1. Keep pressing the key 3 seconds, power down, goes to stand-by mode.
2. Keep pressing the key again 3 seconds to return back to normal
working.
LIGHT
Press the key, turn on or turn o the LED lights inside. In stand-by mode,
the key is invalid.
UP
Press the key once, LED Display in regular ash showing current set
temperature. Continue pressing to adjust set temperature, one press
increase 1℃. Regular ash quit after 5 seconds detecting no press and
new set temperature save. LED display return to show actual temperature
inside.
DOWN
Press the key once, LED Display in regular ash showing current set
temperature. Continue pressing to adjust set temperature, one press
reduce 1℃. Regular ash quit after 5 seconds detecting no press and
new set temperature save. LED display return to show actual temperature
inside.
CHILD LOCK
1. Lock: Press both keys at the same time for 3 seconds to lock.
2. Unlock: Press both keys at the same time for 3 seconds to unlock.
°F/°C - display
change
Switch temperature display between Fahrenheit and Celsius by pressing
both keys for 3 seconds.