To Next PageTo Next PageWhat to do if the red LED flashes 3x with 3 acoustic warning signals on my Klauke EK 425-L?
If the red LED flashes three times accompanied by three acoustic warning signals, it indicates a serious fault. If this occurs repeatedly, return the unit to an Authorized Service Center (ASC). Do not attempt to open the tool or damage its seal. If it happens only once, try crimping the connector a second time.
Identifies and describes the individual parts of the EK 425-L crimping tool.
Details the important operational and functional characteristics of the EK 425-L.
Explains the various LED lights and acoustic signals displayed by the tool.
Provides step-by-step instructions for operating the EK 425-L crimping tool.
Specifies the compatible materials and connectors for the EK 425-L.
Guidance for mounting the tool or its accessories as per general catalogue.
Information on essential service and maintenance procedures for the tool.
General| Brand | Klauke |
|---|---|
| Model | EK 425-L |
| Category | Power Tool |
| Language | English |
