Why is my KleenRite SPP-32327A not picking up solution?
If the KleenRite Vacuum Cleaner isn't picking up solution effectively, ensure the recovery tank drain valve is closed. Check the recovery tank lid gasket for defects and replace if necessary. Clean the float shut-off screen if it's clogged. Secure any loose vacuum hose connections by fastening the cuffs to the hose, and if the hose is defective, replace it.
What to do if my KleenRite SPP-32327A Vacuum Cleaner does not operate?
If your KleenRite Vacuum Cleaner machine isn't turning on, first check if the building circuit breaker has tripped and reset it if needed. If the issue persists, it may be due to faulty switches, wiring, or a faulty power cord, which require contacting a service center.
Why is the solution pump not working on my KleenRite SPP-32327A Vacuum Cleaner?
If the solution pump on your KleenRite Vacuum Cleaner isn't working, ensure the trigger on the wand is fully pulled and that the quick couplers are properly connected. If the problem persists, it could be due to faulty switches, wiring, a faulty solution pump motor, or a faulty pump head, all of which require contacting a service center.
General| Model | SPP-32327A |
|---|---|
| Category | Vacuum Cleaner |
| Power Source | Electric |
| Voltage | 120V |
| Amperage | 10A |
| Hose Length | 7 feet |
| Tank Capacity | 12 gallons |
| Cord Type | Corded |
| Included Accessories | Crevice Tool |
Fields to fill out for future reference regarding machine model and serial number.
Essential safety rules and warnings for operating the machine safely and preventing injury.
Information on proper grounding to reduce the risk of electrical shock.
Explanation and location of important safety labels on the machine.
Illustrated identification of all parts of the cleaning machine.
Steps for preparing the machine for operation, including hose connection.
Instructions for cleaning carpets using the machine's wand and trigger.
Guidance on handling foam buildup, soiled areas, and flammable materials.
Connecting and using accessory tool hoses for different cleaning tasks.
Procedure to remove water from the solution tank.
Steps to empty and clean the recovery tank.
Instructions to prevent freezing damage to the machine and hoses.
Daily, weekly, monthly, and quarterly maintenance tasks.
Proper procedures for storing the machine to prevent damage.
List of parts recommended to keep in stock for common replacements.
Common problems, their causes, and recommended solutions.
Technical details of the machine, including capacity, voltage, and power.
Diagrams showing the physical size and measurements of the machine.
Schematic illustrating the electrical connections and components of the machine.
Visual representation of machine parts with corresponding labels.
Detailed list of all parts with part numbers, descriptions, and quantities.
Detailed list and diagram of the pump assembly parts.
Parts and assembly diagram for the optional floor cleaning tool.
Parts list for a specific model variant of the floor tool.
Parts list and diagram for the hand tool accessory.
Details on warranty coverage for labor and parts for the first 12 months.
Policy for standard warranty part replacements.
Policy for immediate warranty part replacements.
Procedure for getting a Return Authorization number before shipping.
Specific terms, limitations, and exclusions of the machine warranty.
Information and form for registering the machine warranty.
To Next Page
