Do you have a question about the Klein Tools ET120 and is the answer not in the manual?
Detailed technical specifications for the ET120 gas leak detector, including range, sensitivity, and power requirements.
Crucial safety instructions to prevent injury or death when operating the detector, including handling of combustible gases.
Identifies and describes the parts and buttons of the ET120 tester, including front and back views.
Explains warning symbols and safety icons displayed on the meter for user awareness.
Describes the operation and purpose of each button on the ET120 tester.
Guides users through the process of calibrating and using the gas leak detector for measurements.
Instructions for replacing the AAA batteries when the alert lights indicate low power.
Guidance on sensor servicing, cleaning the tester, and storage recommendations.
Information on product warranty, disposal, recycling, and customer support contacts.
Detailed technical specifications for the ET120 gas leak detector, including range, sensitivity, and power requirements.
Crucial safety instructions to prevent injury or death when operating the detector, including handling of combustible gases.
Identifies and describes the parts and buttons of the ET120 tester, including front and back views.
Explains warning symbols and safety icons displayed on the meter for user awareness.
Describes the operation and purpose of each button on the ET120 tester.
Guides users through the process of calibrating and using the gas leak detector for measurements.
Instructions for replacing the AAA batteries when the alert lights indicate low power.
Guidance on sensor servicing, cleaning the tester, and storage recommendations.
Information on product warranty, disposal, recycling, and customer support contacts.
| Detection Method | Non-contact |
|---|---|
| Indicator | LED and audible alarm |
| Power Source | 2 x AAA batteries |
| Frequency | 50 to 500 Hz |
| Operating Temperature | -10°C to 50°C |
| AC Voltage Range | 12V - 1000V |