Klein 4000 Series User Manual

SERIES 4000 SONAR
SYSTEM
Operations and Maintenance Manual
P/N 11210094, Rev. 01
11 Klein Drive
Salem, NH 03079-1249
U.S.A.
Tel: (603) 893-6131
Fax: (603) 893-8807
www.KleinMarineSystems.com

Klein 4000 Series Specifications

General

Brand	Klein
Model	4000 Series
Category	Sonar
Language	English

Summary

Chapter 1: Overview

1.2.2 TPU

Describes the Transceiver and Processing Unit (TPU), its connectivity, and primary functions.

1.2.3 SonarPro Workstation

Details the SonarPro Workstation, its hardware specifications, and software capabilities.

1.2.4 Splashproof Transceiver and Processing Unit (SP-III TPU)

Explains the SP-III TPU, a splashproof alternative, and its features.

Chapter 2: Specifications

2.2.2 TPU

Lists the physical and technical specifications for the TPU unit.

2.2.3 SonarPro Workstation

Provides specifications for the SonarPro Workstation hardware and peripherals.

2.2.4 SP-III TPU

2.3 Towfish

Chapter 3: Setup and Test

3.1 Unpacking and Inspection

3.2 Locating the Topside System Components

3.3 Power Requirements

3.4 Towfish Setup

Procedures for setting up the towfish, including attaching fins and connecting the tow cable.

3.4.1 Attaching the Stabilizer Fins

3.4.2 Connecting the Tow Cable

Guides the user through connecting the tow cable to the towfish assembly.

3.4.3 Connecting the Tow Cable with the Optional K-Wing I or K-Wing II Depressor

3.5 Topside System Connections

Describes how to connect the topside system components together using supplied and user cables.

3.5.1 TPU Connections

3.5.2 SonarPro Workstation Connections

3.5.3 SP-III TPU Connections

3.6 Connecting the Topside System Components

Guides connecting system components using supplied and user cables for different configurations.

3.6.1 Connecting the TPU and the SonarPro Workstation

Step-by-step instructions for connecting the TPU and SonarPro Workstation.

3.6.2 Connecting the SP-III TPU and the Laptop Computer

Guides connecting the SP-III TPU to the laptop computer for system operation.

3.7 Topside System Controls and Indicators

Identifies and explains the controls and indicators on the topside units for operation and monitoring.

3.7.1 TPU Controls and Indicators

3.7.2 SonarPro Workstation Controls and Indicators

3.7.3 SP-III TPU Controls and Indicators

3.8 System Activation and Test

Procedures for activating and testing the system before commencing an actual survey.

3.8.1 Activating and Testing the System on Deck

Steps for activating and testing the system while it is on the deck.

3.8.2 Activating and Testing the System at Sea

Procedures for activating and testing the system during at-sea operations.

Chapter 4: Equipment Maintenance

4.1 Maintenance General Comments

4.2 Maintenance Checklists

Outlines recommended maintenance schedules: daily, weekly, and long-term checklists.

4.2.1 Daily Maintenance Checklist

4.2.2 Weekly Maintenance Checklist

4.2.3 Long Term Maintenance Checklist

4.3 Disassembling and Reassembling the Towfish

Instructions for disassembling and reassembling the towfish for troubleshooting or repair purposes.

4.3.1 Disassembling the Towfish

Step-by-step guide for safely disassembling the towfish components.

4.3.2 Reassembling the Towfish

Detailed instructions for correctly reassembling the towfish.

4.3.3 Removing the Transducers

Procedure for removing the transducer assemblies from the towfish housing.

4.3.4 Installing the Transducers

Steps for reinstalling transducer assemblies into the towfish housing.

Chapter 5: Technical Description

5.2 TPU

5.3 SP-III TPU

Appendix B: Configuring and Updating the TPU/SP-III TPU

B.1 Starting Linux TPU/SP-III TPU Updater

B.2 Querying or Changing the TPU/SP-III TPU IP Address

Procedure for setting or verifying the system's IP address via the updater.

B.3 Editing the TPU/SP-III TPU Startup File

B.4 Updating the TPU/SP-III TPU Software

Guide for updating the firmware and software on the TPU/SP-III TPU using provided files.