kleinmetall ROADMASTER DELUXE User Manual

Mounting Instruction
kleinmetall GmbH
Hainstraße 52
63526 Erlensee
Telefon 06183.91120-0
Fax 06183.72152
E-Mail info@kleinmetall.de
www.kleinmetall.de
Product name
Product designaon
Parts No.
Mounng
Usability
Type and design
Dimensions
Weight
ROADMASTER DELUXE
Universal luggage and dog guard
10001413
to the headrest bars
protecon of passengers during transport of cargo
anodised aluminium proles, powder-coated steel, stainless steel
height: 25 cm, width: 95 to 145 cm (telescopic bars)
2 kg
Please read these instrucons carefully and store them in a safe place.
Whenever the guard is used, make sure it is correctly mounted!
5er
3er
Page 1Connues on next page
5
1
2
43
6
15
16
7
8
9
10
11
12
13
14
17
19
20
21
18
1. Frame bracket _________________________ 1x
2. Lower frame part _______________________ 1x
3. Telescopic bar _________________________ 6x
4. Fixing sleeve ___________________________ 6x
5. Phillips screw “small” ___________________ 4x
6. Angle bracket __________________________ 2x
7. U-clamp ______________________________ 2x
8. Phillips screw “big” _____________________ 4x
9. Clamp shell ____________________________ 2x
10. Clamping ball __________________________ 2x
11. Pressure shell __________________________ 2x
12. Bearing element _______________________ 2x
13. Headless screw M6 _____________________ 2x
14. Hexagon nut M6 _______________________ 4x
15. Bearing segment with clamping bracket ____ 2x
16. Bearing segment without clamping bracket _ 2x
17. Allen screw M6 ________________________ 4x
18. Washer _______________________________ 4x
19. Allen key “big” _________________________ 1x
20. Allen key “small” _______________________ 1x
21. Phillips screwdriver _____________________ 1x
Partlist

kleinmetall ROADMASTER DELUXE Specifications

General

Brand	kleinmetall
Model	ROADMASTER DELUXE
Category	Automobile Accessories
Language	English

Summary

Mounting Instructions

Partlist

List of all components included in the mounting kit with their respective quantities.

Mounting Process

Step 1: Initial Assembly

Assemble the frame bracket and lower frame part for initial setup.

Step 2: Telescopic Bar Adjustment

Attach and adjust telescopic bars to the frame for width customization.

Step 3: Positioning in Vehicle

Position the assembled guard between headrest bars, noting max distance limits.

Step 4: Securing to Headrests

Attach clamping shells and balls to headrest posts for secure mounting.

Step 5: Connecting Frame Parts

Connect the main frame to the headrest mounting points.

Step 6: Final Tightening

Securely tighten all screws and brackets to the headrest mounts.

Step 7: Angle Adjustment

Adjust the angle of the guard for optimal positioning and stability.

Step 8: Verification and Safety Check

Verify correct assembly and check for proper fit and security.

Step 9: Final Placement in Vehicle

Insert the completed guard into the vehicle's cargo area.

Step 10: Central Positioning

Ensure the guard is centrally positioned and all parts are tightly fixed.

Product Care and Information

General Notes

Important notes on central positioning, headrest security, and vehicle compatibility.

Safety Instructions

Guidelines for securing loads, checking fittings, and prohibiting passenger transport.

Cleaning Instructions

Recommendations for cleaning the guard using neutral soap lye.

Maintenance Instructions

Advice on performing visual inspections and replacing damaged parts.