Operation
Pressing the button on the remote fob will activate your air horn. The
horn will remain activated for as long as the button is pressed.
Each remote fob has a sliding cover that can be positioned over the
activation button to prevent accidental activation of your air horn. Be
sure to use it. Accidental air horn activation can result in many things -
few of which are pleasant.
Installation
TM
The Sniper control module is not waterproof and must be mounted in
a location that is clean and dry. Underneath the dash is suggested.
TM
Wiring the Sniper is easy and requires only four connections.
Black - to ground
Red +12v Input
Pink +12v output to air valve
White +12v IGN/ACCY
Antenna
Programming
Button
LED
To Next Page
Loading...