3
ENGLISH
Pairing: blue light flashes.
Disconnected: fixed red light.
Connected: fixed blue light.
Reset state: fixed blue and red light.
Power button: press and hold Picto for 3 seconds to turn the headset on or off.
Play: short press the Picto button while music is paused.
Pause: short press the Picto button while music is playing.
Next track: long press to go to the next track.
Previous track: long press to go to the previous track.
Volume Adjustment: short press Picto or Picto to increase or decrease the volume.
Microphone mute: press the button (9) to mute/unmute the microphone.
RGB lights: press and hold the Picto and Picto buttons for 2 seconds to turn the lights on or off. Short press
these two buttons to change the light color/effect.
Note: while in Wired mode (using the 3.5 mm port), all the control buttons are disabled.
To use them, activate a wireless mode (Bluetooth or USB receiver).
Pairing: flashing in blue and green alternatively.
Power on: fixed blue.
Wireless mode: flashing in blue while music is playing. Fixed blue when paused.
Charging status: fixed red while charging, which turns off when fully charged.
LED indicator (headset)
LED indicator (USB transmitter)
HEADSET CONTROLS
Answer call: short press Picto when a call coming in.
Reject a call: long press Picto when a call coming in.
Hang Up: short press Picto while in an active call.
Re-Dial: double press Picto to re-dial the last phone number from your call record (in Bluetooth mode only).
Phone Calls
To Next Page
Loading...
