5
TECHNICAL FEATURES
MODEL
D 152 DF D 200 DF D 300 DF D 400 DF D 500 DF
Operating
Temperature
°C -18 / -34 -18 / -34 -18 / -34 -18 / -34 -18 / -34
Freezing Capacity Kg/24h 7.5 7,5 12 17 23
Increase to -9°C Hours 20 20 31 34 40
Energy
consumption
KWh/24h 1.00 1.95 2.25 3.20 4.50
Power W 100 138 163 210 236
Voltage/Frequency V / Hz 220-240/50 220-240/50 220-240/50 220-240/50 220-240/50
Exterior dimensions LxWxH
(mm)
584x675x845 724x720x845 1014x720x845 1304x720x845 1554x720x845
Interior dimensions LxWxH
(mm)
460x510x705 600x510x705 890x510x705
x510x705 1430x510x705
Gross Volume l 140 190 295 400 490
Net Volume l 130 175 272 371 455
Weight (Net) Kg 38 47 55 67 74
Noise Output dBA 40 50 56 69 74
5. ASSEMBLING CHEST FREEZERS / THE INITIAL START UP
Remove the plastic blockings inserted between the lid and the body.
Air circulation at the rear is required for the body to operate efficiently.
Move the freezer backwards to place it properly.
Allow minimum 5 cm of space from the sides and the rear in order to ensure proper air
circulation.
Your chest freezer is now ready to plug in.
Attention: When you initially operate the chest freezer or open the lid while the freezer is
functioning, ambient air in the room will flow into the body. Since this fresh air will suddenly
cool, its volume will get dense and it will make a vacuum effect for a period of 10 minutes in the
body. In this case, you may find it hard to open the lid of the freezer. Wait for a little while and
don’t force on the handle. After a short time, the lid will allow itself for an easy opening.
To Next Page
Loading...
