4.4 Function Use
19
4.Instruction for Use
7.Mopping Function
Inject Water
Remove out water tank
Remove dust box
Open plug, fill with water
Close plug tightly
Install water tank
Wet the cloth, stick it
Put back dust box
Install cloth plate to water tank
Slide water tank into robot
until you hear it lock with
a click.
Note:
a. It is recommended that all floors are vacuumed at least three times before the first
mopping session to reduce excessive dirt buildup on the mop.
b. To prevent corrosion or damage, do not use cleaning fluid or disinfectant in the water tank.
c. Do not use hot water ,which may cause the tank to deform.
To Next Page
Loading...