Klippan Opti 129 - Washing instruction; Parts on the seat; Instruction manual; Preparations to mount the seat into the car

12 13



1 11
Seat-cover 
2 12
 Adjustment of headrest
3 13
 Adjustment of shoulderstraps
4 14
Shoulder Pad User instruction
5 15
Buckle Adjustment of lower tether straps
6 16
Buckle Pad Lower tether straps
7 17
Central Adjuster Load leg
8 18
 Locking for load leg
9 19
Seat-shell Adjustment of Recline
10

GB


1
5
6
7
8
9
10
11
12
13
14
15
17
18
16
3
42




rails on the front seat of the car if the
strap can be threaded between the
floor and the rail.
Mounting of the lower tether straps on
the sides of the backseat.
Lower tether straps can be mounted to
the backrest of the front seat.



fastened into the car. Klippan item
number for these 150-55-706.
Check beneth the car seat if you can


Mounting the lower tether straps


Place the child seat on the seat of the
car. Adjust the reclining on the recline-


Turn out the load-leg against the
stopper (1). Adjust the length on the

on the side (2). Check that the load-
leg is properly against the floor of the

locked (3).
Pull out completely the cars 3P seat

mounting hooks on the child seat.

cover of the childseat and lock the



Thread the blue locking clip beneth the




mounted as shown on the image.

child seat.
The shoulder straps should be at the


Pull the handle and adjust the height of
the headrest.



one end of the pipe into the mount and
then press the other end of pipe into
the other mount.
GB
19
20
21
22
Tighten as tight as possible the lower
tether straps.
The buckle on the lower tether strap

can be dismounted in reversed order.
Placing in the middle of the back

prevents the correct mounting of the
load leg. If the load leg cannot be

seat cannot be mounted on this place
in the car.
25
Mounting the lower tether straps on the
passanger side.
The best way to mount the child seat in
front on the passanger side is to place

load leg and recline tube. The child seat

with a 100mm space to the dashboard.




23
24