Klipsch CP-6 - Step 4: Test Sound; Testing Connections and Polarity; Step 5: Attach Grill and Alternative Mounts

:%~~:~~7f
f;•
.'
'"
\:
STEP
·4
·.
·
·
TEST
SOUND:
Play
music through speaker
to
make sure
· fOnnections are
tight
and polarity is correct
--t
·
USING
DIFFERENT
MOUNTING
BRACKETS
~
"'
>
AJI
CP
Series speakers have a
1/4",
20-thread insert on the back
·::
.
-
~
JR)ttom
that
you can attach a different, compatible mount.
-......
STEP
5
Once speaker is in the
final
position and tested, attach
grill
by
pressing
grill
into
channel encircling
speaker
front
*SPEAKER
GRILL
REMOVAL:
Use
included
grill removal tool,
lnse.
rt
into a top corner and
gently pull
out. Repeat on a corner next
to
first
one
pulled,
then
pull
out grill gently
with
hand.
NOTE:
the
grill is designed
to
fit
snug on speaker
to
both remain on and
to
remain
tight. Continued removal/reinsertion
of
grill
may make
It
loose
and subject
to
either
vibration
or
slippage.